Discussion - Member to Member Sales - Research Center
Discussion - Member to Member Sales - Research Center
Normally I would soak them off in warm water, perhaps with a touch of detergent. But is that the best method? I thought I had better check ...
I have now looked up prices on these and they are of low value, but I would still like to know the best way to lift and clean.
Login to Like
this post
Soaking them will be the best way, or putting them in a sweat box. However, the mold is a serious problem. Soak them off, and see what the stamps look like when dry. If they are stained from the mold, then they won't have much value. The mold will root itself in the paper fibers, and may come back, spreading to other stamps as well. Even soaking them off the paper will lessen the values, but if they come off clean, at least they will still be collectible until better examples are found to replace them.
1 Member
likes this post.
Login to Like.
We call brown spots and brown edges, especially in the perforation of stamps, rust.
Rust is a fungus in the paper of the stamp and is caused by moisture, varying temperatures and a lack of oxygen. Rust can be prevented by keeping the stamps dry and at a constant temperature. Regular aeration by leafing through a stamp album allows fresh and oxygen-rich air to reach the stamps.
That is why it is also wise to keep stamp albums in upright position and not to crush them in a pile for a long time.
But if rust has entered our stamps, we can remove it.
I do not want to make special advertising, but the company Lindner (ERNI Stockfleckenentferner = ERNI Mold remover) has put together two liquids with which this can be done.
See below.
The instructions for use are on the bottles.
If you immerse the stamp in liquid A, it will turn blue or red.
Don't be alarmed, because if you submerge it in liquid B a few minutes later, the color will return to normal white and the rust has disappeared.
When you experience that for the first time, you have the feeling that you can do magic.
You have to determine by yourself those "few minutes".
If you do it too short, not all rust will be removed, but if you do it too long, the seal will become unnaturally white.
Two more comments can be made.
You cannot treat unused stamps with gum like this because the gum will also disappear. (If you don't mind, go ahead)
You cannot remove rust "from the outside" through staples, rings and paper clips, that is iron oxide.
TRY THIS FIRST WITH SOME CHEAP STAMPS.............
1 Member
likes this post.
Login to Like.
07:12:26am
A friend recently showed me his stamp collection that he had as a teenager. Some of the mint stamps, originally hinged, are now stuck to the page with their own gum as well. Some of these, notably German WW2 occupation overprints on Hitler stamps (OSTLAND & UKRAINE), have also developed a black mold at the edges. He asked about the best way to get them off the page.
Normally I would soak them off in warm water, perhaps with a touch of detergent. But is that the best method? I thought I had better check ...
I have now looked up prices on these and they are of low value, but I would still like to know the best way to lift and clean.
Login to Like
this post
re: What is the best way to lift stuck down stamps?
Soaking them will be the best way, or putting them in a sweat box. However, the mold is a serious problem. Soak them off, and see what the stamps look like when dry. If they are stained from the mold, then they won't have much value. The mold will root itself in the paper fibers, and may come back, spreading to other stamps as well. Even soaking them off the paper will lessen the values, but if they come off clean, at least they will still be collectible until better examples are found to replace them.
1 Member
likes this post.
Login to Like.
re: What is the best way to lift stuck down stamps?
We call brown spots and brown edges, especially in the perforation of stamps, rust.
Rust is a fungus in the paper of the stamp and is caused by moisture, varying temperatures and a lack of oxygen. Rust can be prevented by keeping the stamps dry and at a constant temperature. Regular aeration by leafing through a stamp album allows fresh and oxygen-rich air to reach the stamps.
That is why it is also wise to keep stamp albums in upright position and not to crush them in a pile for a long time.
But if rust has entered our stamps, we can remove it.
I do not want to make special advertising, but the company Lindner (ERNI Stockfleckenentferner = ERNI Mold remover) has put together two liquids with which this can be done.
See below.
The instructions for use are on the bottles.
If you immerse the stamp in liquid A, it will turn blue or red.
Don't be alarmed, because if you submerge it in liquid B a few minutes later, the color will return to normal white and the rust has disappeared.
When you experience that for the first time, you have the feeling that you can do magic.
You have to determine by yourself those "few minutes".
If you do it too short, not all rust will be removed, but if you do it too long, the seal will become unnaturally white.
Two more comments can be made.
You cannot treat unused stamps with gum like this because the gum will also disappear. (If you don't mind, go ahead)
You cannot remove rust "from the outside" through staples, rings and paper clips, that is iron oxide.
TRY THIS FIRST WITH SOME CHEAP STAMPS.............
1 Member
likes this post.
Login to Like.